Work Lights Installation And Review Videos

Opti-Brite LED Work Light Installation - 2013 Ford F-250 and F-350 Super Duty- Video

Rob: Hey everybody, Rob here at etrailer.com, and today we're going to be taking a look at the Optronics Opti-Brite LED Work Lights on our 2013 Ford F-250. Now, having a set of work lights on your truck can come in handy in a lot of different situations, maybe we need to get to the job site and it's at night and we don't really want to carry a generator around to have some work lights that plug into 110. Well, these work lights mounted under your truck are going to work with 12 or 24 volt systems and make it a lot easier so you can get light almost in any direction. We chose to amount ours here at the back of the bumper so we could have light coming at the back.The truck already has some work lights on the front, that way we can have light all the way around our truck, so whether we need to back up to a trailer, unhook the trailer, unloaded it or anything in the back of the truck, we'll have light. But then again on the front, if we need to have light up there, we have light there as well.Even in a fully lit room like we're in right now that has a lot of light in it, you can see how much light that light is putting on the door there. So, you can only imagine how bright it is when there's not a lot of ambient light and the lights are turned off. more

3/18/2020 1:32:18 PM

Vision X Lights Utility Market Xtreme Light Installation - 1999 Hummer H1- Video

Today on our 1999 Hummer H1, we'll be installing the Vision X Utility light. That's 4 inches round, and it's 35 watts. Part number XIL-UMX4060. These Vision X lights are extremely bright, and a rugged LED utility light that produces 3700 raw lumens in a 60 degree flood beam. They are a high light output and a low power consumption that makes it ideal for OE upgrades for commercial or industrial vehicles, or off road vehicles. These run at maximum efficiency with minimal heat, with the aluminum housing. more

6/11/2015 10:21:32 AM

Vision X Duralux Floodlight Installation - 2000 Nissan Xterra- Video

Today on our 2000 Nissan Xterra we're going to be installing the Vision X Duralux floodlights. These are a LED-based light offering 20 watts of power and a 60-degree beam. They're 4" square. They're sold individually as part number DURA-460. Let's take a look at the difference in lighting that we've got. Standard headlights are going to give us an intensity of about there. When we turn on our bright lights you'll see definitely a little bit brighter. more

2/5/2015 1:48:13 PM

Vision X Duralux Floodlight Installation - 2010 Dodge Sprinter- Video

Today on our 2010 Dodge Sprinter Motorhome we're going to be installing the Vision X Duralux Floodlight in LED design, part number DURA-660. Here's what our new Vision X light looks like. You'll notice it has a nice sturdy metal bracket, has a metal housing and it has a waterproof style connection point. Here on our motorhome this right here is the light we actually removed. It was actually a halogen style light before. These are no longer working and these we're actually for the back up lights so whenever you put the motorhome in reverse it would illuminate back behind the motorhome. We're going to be actually replacing these with the new Vision X lights. On this particular application we did have to do a little bit of fabrication and make some brackets to make them work properly, as these previous lights just screwed in at the top of the motorhome whereas our new Vision X is much sturdier with a metal bracket and it has a single mounting location. You may have to do some bracket fabrication, depending on exactly where you choose to mount the light. We're already gone ahead and removed the light that we showed you down lower. more

1/8/2015 12:31:53 AM